Cleste model IPBK10 pentru ridicare, manevrare si depozitare profile tip H
Capacitati de ridicare cuprinse intre 0.5 tone si 4 tone
Deschidere falci cuprinsa intre 5 si 28 mm
The IPBK10 beam clamp is used for lifting, transferring and stacking H-Beams. A ring-center hoist eye allows for the beam flange to remain vertical.
This series of clamps can be used in vertical and horizontal moving, transferring and stacking of different types of structural designs, such as H-Beams, angles, etc, depending on the application desired.
IPBK10: Available in capacities of 0.5 thru 4 metric tons.
IPBK10: Jaw openings available: 5 to 28mm
Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
Individually Proof Tested to 2 times the Working Load Limit with certification.
Company name (CrosbyIP), logo, Working Load Limit and jaw opening permanently stamped on body
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp.
Minimum WLL of 10% of Maximum WLL.
Maintenance and repair kits are available.
For use with materials with a plate surface hardness to 279HV10, only 5% min WLL is needed.
Manufactured by an ISO 9001 facility.
All sizes are RFID EQUIPPED.